免费少妇A级毛片野外大战,小少妇BBBBBBBBB野外,91精品久久久久久综合五月天,精品人伦一区二区三区牛牛视频,一级a一级a爰片免费免水l软件
噴嘴_脫硝噴槍_霧化噴嘴_sncr噴槍_工業/扇形噴嘴-上海斐卓Hotline:021-57675090
噴嘴_脫硝噴槍_霧化噴嘴_sncr噴槍_工業/扇形噴嘴-上海斐卓
QQ交談
服務熱線
Position: 首頁 > FEIZHUO ENGLISH > PRODUCTS > Denitration gun

SNCR denitration spray gun

Introduction of the characteristics of SNCR denitration spray gun 1. Material of SNCR denitration spray gun: Due to the high working temperature of the SNCR denitrification spray gun, its operating temperature is generally (850 degrees-1100

Application technology consultation: Feizhuo@feizhuo.net     Tel:13916639930


Introduction to the characteristics of SNCR denitration spray gun
1. Material of SNCR denitration spray gun:
Due to the high working environment temperature of the SNCR denitration spray gun, its use temperature is generally (850 degrees -1100 degrees). In the SNCR denitration system, the flow rate of the flue gas in the boiler or pipeline is fast, and the flue gas is mixed with a large amount of dust. In harsh environments, the denitrification spray gun wears severely. The material of the denitration spray gun must be high temperature resistance, corrosion resistance, and wear resistance; the spray gun rod of the denitration spray gun is required to be made of 310SS or higher, which can maintain high strength, corrosion resistance and good wear resistance in an environment below 1200 degrees , Ensure the continuous balance of denitration.

2 The atomization effect of the denitration spray gun and the uniformity of the flue gas mixing
The spray angle of the SNCR denitration spray gun ranges from 15 degrees to 150 degrees, and the penetration power of the liquid is different for different spray angles. A small angle denitration spray gun has strong spray penetration, and a large angle denitration spray gun covers a large area. The length of the denitration spray gun and the spray point into the furnace are different. Use a variety of different angles of denitrification spray guns, the installation position through CFD flow field simulation analysis combined with on-site measurement to obtain a good layout, so as to achieve a higher denitration efficiency.

3. The scalability of the denitration spray gun
SNCR denitration spray gun generally comes with a retractable adjustment function. In one case, when there is a small amount of deviation between the site working conditions and the design, the position of the denitration spray gun can be flexibly adjusted to ensure good denitration efficiency. In addition, when the denitration spray gun is not in use, it can be withdrawn from the furnace at any time, thereby prolonging the service life of the denitration spray gun.

4. Atomized particle size of denitration spray gun
The atomized particles of the SNCR denitration spray gun do not need to be cooled like the flue gas. The finer the better, the moderate flue gas particles can achieve good denitrification efficiency. The particles are too small and the penetration is poor, which reduces the denitration efficiency; the particles are too coarse and the particles are discharged The distribution area is reduced and the denitrification efficiency is reduced. At the same time, due to the fast flue gas flow rate, the spray particles cannot be completely atomized in a short time, and the generated droplets will cause the furnace to burst. Therefore, the atomized particle size should be selected according to the specific situation.

5. The gas temperature inside the boiler determines the installation position of the denitration spray gun
For boilers with urea solution, the denitration spray gun should be installed within the temperature range of 950+50 degrees as far as possible; when ammonia solution is used, the denitration spray gun should be installed at a position of 900+50, and the installation position must avoid the flame. The burning time of the waste liquid is generally required to be above 0.5s to ensure a sufficient reaction; the installation position of the denitration spray gun directly determines the denitration efficiency of the SNCR, and the location of the denitration spray gun is the key point of the SNCR system. The installation of the denitration spray gun is slightly inclined downward, and there is a certain safe distance when it reaches into the furnace;
CFD flow field simulation to determine the injection point;
Install a temperature sensor to test the temperature distribution in the furnace and determine the spray position.
Diagram of the installation position of the denitration spray gun and the physical diagram of the denitration spray gun;
Installation drawing of spray gun
噴槍安裝圖紙安裝圖
sncr-1.jpg

 
噴槍參數

 

 

 

Similar

To provide you with a full range of quality services.

139 1663 9930

Wechat QR code

Telephone:139 1663 9930
Landline:021-57675090
Mailbox:Feizhuo@Feizhuo.net
Website:http://m.ipinyuan.cn
Address:平湖工廠:浙江省.平湖市新埭鎮創業路1號1幢

中文字幕免费高清电视剧网站 | 蜜桃AV秘 无码一区二 | 日韩成人无码毛片 | 日韩亚欧在线观看 | 国产一区二区不卡老阿姨 | 少妇伦子伦精品无码 | 91福利影视在线 | 国产精品免费观看 | 国产91清纯白嫩初高中 | 黄色视频网页入口在线观看 | 国产不卡黄色视频播放 | 17c国产一区二区黑料在线观看 | 在线观看中文 6AV | 色欲av免费观看 | 免费一级婬片A片啪啪声故事 | 中文字幕一区蜜桃 | 河北真实伦对白精彩脏话 | 成人三级视频在线观看密乳 | 天天澡天天爽爽天干天搞 | 久久久蜜桃一区二区人 | 成人黄A片免费看 | 特黄三级又爽又粗又大 | 亚州免费高清视频 | 性爱视频直播网站 | 国产精品免费观看网址入口 | 黄片下载软件国产偷拍 | 免费看的强伦轩一级A片在线观看 | 亚洲无码一区二区av | 成人动漫免费看一区二区 | 亚洲色精品一区二区三区乐蜜播放 | 羞羞视频网站在线观看 | 国产一级婬片A片AAA蜜臂 | 中文字幕人成乱码熟女免费69 | 亚洲在线在线观看免费高清 | 久激情内射婷内射蜜桃欧美一级 | 成人一区二区天堂 | 一级丰满老熟女毛片免费播放视频 | 国产黄色视频精品久久久 | 97精品熟人区一区二区三区四区不卡 | 亚洲乱熟女综合一区二区三区 | 插成熟少妇一线天 |